Woodland Hills Plumber install and repair pipes, fixtures, and other plumbing equipment used for water distribution and wastewater removal. Plumbers must be knowledgeable about building codes and regulations.
Plumbers often earn a good living, and some become very wealthy. Some plumbers work as independent contractors. Others work for construction companies or maintenance departments.
There are plenty of obvious reasons to call a plumber – dripping faucets, shower heads that won’t stop running, and discolored water that indicates the presence of rust in your pipes. Less obvious leaks are difficult to spot and can cause significant damage if left unchecked over time. These are often found in piping that runs behind walls or under flooring, and can be a challenge for homeowners to track down without the help of a professional.
Pipe repair can involve patching a section, using epoxy lining or other methods to seal the leak and strengthen the pipe. If the entire pipe needs to be replaced, a plumber can use a trenchless method such as pipe rerouting. This involves digging a small hole to access the damaged section of the pipe and replacing it with a new section of pipe.
Before beginning any type of plumbing repair, a plumber will shut off the water supply to the affected area. You can usually find a water shut off valve located under your sink or on the wall behind a toilet. Turning this valve counterclockwise will shut off the flow of water to the affected fixture. After the water is shut off, the plumber can remove any accumulated debris in the affected area. If the leak is a result of a loose fitting, the plumber can simply tighten the connection with the right tool.
In more serious cases, the plumber may have to dig up and replace a section of the leaking pipe. This can be a more costly option, but the savings in water and potential repair costs from not having to continuously pay for leaking pipes can make it worth the investment.
For smaller, localized leaks, fiberglass tape could offer a quick fix. This is a simple solution that can buy you some time until a plumber can come out to evaluate the leak and perform more permanent repairs. A plumber can also use a hydraulic system to inject epoxy resin into a damaged section of pipe, which will then harden and seal the leak. This is a minimally invasive option for repairing leaks in pipes that run underground or inside walls.
Water Heater Repair
A plumber who specializes in water heater repair has the tools and knowledge to fix issues that typically occur in this type of equipment. Common problems that a plumber will help their clients with include a lack of hot water or rattling sounds that indicate sediment buildup within the tank. In most cases, the problem can be resolved by draining the tank and relighting the pilot light. If the problem persists, it may be time to consider a new unit.
If you are experiencing a lack of hot water, check the circuit breaker to make sure it hasn’t tripped. It is also possible that the heating elements aren’t working correctly. To test this, a plumber will disconnect the power and remove the access panel on the water heater. Once the panel is removed, they will use an electrical continuity tester to measure the resistance of each element. If the lower thermostat has no continuity, it is a good idea to replace it.
Another possible cause of a lack of hot water is that the heater’s capacity isn’t large enough to meet the household’s needs. In this case, it is a good idea to consult with a plumber who can help the homeowner choose an appropriately sized water heater for their home.
Licensed plumbers are trained to understand the design and function of all types of water heaters. This means that they can provide accurate and efficient repairs to ensure the customer has access to hot water again soon. Furthermore, plumbers will know how to handle the warranty on the water heater in case it is still under manufacturer’s guarantee.
In addition to water heaters, plumbers can help with other plumbing fixtures in a home. This includes toilets, faucets, tubs and showers. They can even install and repair appliances such as dishwashers and washing machines. In some instances, a plumber can help a client with their septic system, especially if it is located on the property and not connected to public sewer lines. They can also advise customers on how to keep their plumbing in top condition.
Drain Cleaning
Drain cleaning is a service that plumbing companies provide to customers. It involves removing buildups of hair, soap scum, fats, oils, and other materials from inside of your pipes and drains. The goal is to keep the pipes flowing freely and without obstructions. This prevents water and waste from backing up into your home’s fixtures and appliances, which can cause serious problems.
Most clogged drains are caused by organic debris that builds up over time inside your drain lines and pipes. Things like food scraps, skin cells, hair, and soap scum can all accumulate inside of your drains and pipes, eventually causing them to stop functioning properly. Over time, these clogs can lead to overflowing or backups in your sinks, tubs, and toilets. A plumber can use a wide variety of tools and machinery to remove these buildups and get your drains working as they should.
When your drains are not functioning properly, it can be frustrating and even dangerous. Standing water around your drain openings can attract pests and bacteria, and it can also create a breeding ground for mold and other unwanted organisms. If you hear gurgling sounds or smell rotting foods coming from your drains, this is a sign that you have a serious clog that needs to be addressed as soon as possible. A professional plumber can use a variety of tools to quickly and effectively clear your clogged drains.
While many homeowners try to unclog their own drains using chemical drain cleaners or a homemade snake, these methods usually do not work and may actually cause more damage to your pipes. If your clog is especially severe, a plumber may need to use more advanced mechanical tools to break up and remove the clog completely. This can be done through a process called hydro jetting, which involves feeding a high-pressure water jet into your pipe. This blasts away the clog-forming residue and cleans the entire length of your pipe. For more information on drain cleaning and other plumbing services, contact your local plumber today! They’ll be happy to answer any of your questions.
Pipe Repair
The pipes that bring water into and carry waste out of a home need to be properly cared for or they may start to leak, break, or burst. The plumber can repair or replace pipes and their fittings like valves, tees, adapters, collars, and hangers. Pipe repairs or replacements are a major plumbing service and can be very costly, so they should only be done by an experienced plumber.
When a pipe starts to leak or burst, it can cause serious damage to your property and water damage in your home. A professional plumber can inspect your piping to determine the best course of action, which will usually include either a pipe patch or a complete pipe relining. Pipe relining is typically more cost-effective than replacing the entire pipe.
Before making any pipe repair, the plumber will make sure that the pipe is clean and dry. Leaks are most often caused by damaged or old joints. If the joints are tightened, it can seal the leak and reduce water pressure. However, the plumber should never overtighten a joint as this can damage or crack the pipe.
If the pipe is leaking around the joint, it’s a good idea to use a gasket and a slip coupling to create an airtight connection. Ensure that the coupling is the same size and material as the pipe and that it’s installed correctly, using an adjustable wrench to tighten the nut.
Another option is to use a duct tape or plumber’s putty to seal the leak. This is a quick and inexpensive fix for a small leak, but it’s only a temporary solution. The plumber can also use a pipe repair clamp kit, which is available in hardware and plumbing supply stores. This is a similar method to the duct tape but uses a rubber sleeve that’s centered over the damaged section of pipe and extends at least an inch past each side.
The plumber can also install a plastic or metal slip coupling on a corroded or cracked pipe. This is a relatively easy and inexpensive DIY project, although it’s important to ensure that the coupling is made for the pipe material and is the right size.
